I have owned my Edge HD for about 4 years now and in the main, I have been very pleased with it.  There are two problems with it:

  1. It's very heavy.
  2. It can be a pain to focus - especially when imaging.

I can do much about item 1. but I have been looking at options to help me improve the focussing of the telescope.

There are two problems with focusing, the first is that just touching the focus knob will set the telescope wobbling on my EQ-6 mount. Upgrading to a more rigid mount is a nice thought but financially not really viable at the moment. I really need to be able to focus it without touching the telescope. The second problem is trying to establish exactly where the telescope focus actually is in relation to the number of turns on the focuser. The focuser is essentially a brass linking tube that connects to a screw that moves the primary mirror up or down. There is no method of identifying where the mirror is and even which direction it needs to be moved or by how much to achieve focus. This is very frustrating when trying to focus the telescope when using long exposures on a camera. 

Last year (2025), the BAA Journal had a short article on modifying a C11 to add a low cost turns counter (properly called a rotary encoder). This set the grey matter churning and after a few months, a similar rotary encoder was purchased (via eBay) from a retailer in China. I already had a very old (about 20 years old) electric focuser that I had used on my SkyWatcher 200 reflector which became redundant when I upgraded the focuser to a Crayford style dual speed unit. (A huge improvement).

SkyWatcher Electric Focuser

All I needed to do was to marry the two components with the Edge11 focusing screw coupling tube. Reasonable metalmaking workshop tools are required, specifically files, a set of drill bits (22mm and 26mm are the larger ones required), a pillar drill and a friend with a lathe or a contact at a local model engineering society. You will need a 3D printer or enlist one of the online companies to do the printing for you.

This is what I ended up with:

The top and bottom plates are 3mm aluminium sheet, the spacer between in 21mm deep, 3d printed.

The two gears are a  (6mm) 30 tooth on the motor gearbox and a 60 tooth on the focusing coupling tube. A short length of brass rod (17mm diameter) fits perfectly within the focus screw coupler. This is turned town (using a lathe) to 14mm diameter to connect to the rotary encoder which is located on the top plate and above the coupler. A 252 6mm toothed belt links the two pulleys, the belt is not shown on the drawing. The only modification to the telescope is a M3.5 hole drilled through the coupling tube to lock the brass rod and the 60 tooth gear that drives the counter.

The 60 tooth gear had the shaft hole opened out to 22mm and this sits over the coupling tube.

This shows the bottom view with the the bottom cover set transparent. The gears are represented but no belt is visible

The engineering (CAD) drawing here shows the critical measurements:

The bottom plate uses the 3 existing screws that locate the orange disc surrounding the focuser.

The top view diagram has most of the repetitive dimensions omitted.

This photo shows the basic layout with the top plate omitted. At this point, I was checking the belt tension.

The distance between the motor and focus shaft centre is nominally 81mm for a 252 tooth belt, but my belt was a little on the tight side. If I did this again, I would find a way of making the belt tension adjustable. Possibly by using the motor mount plate that came with the original focuser kit.

This is what it looks like completed and fitted. Stainless steel 30mm countersunk screws with M3 Nyloc nuts hold it together. The 3 screws surrounding the counter are inserted from the underside as they are inaccessible when the base plate is screwed down.

The paintwork is about 8 coats of red spray enamel (from Halfords). 

In Use

Fortuitously, especially during probably the wettest February on record, we had a clear afternoon and evening following final assembly.

I set up mid afternoon and with the moon at almost first quarter I calibrated the counter for 3 of my lenses and my ASI585MC Pro camera. It was an actual dream to use. Focusing was very smooth if a little slow, one revolution of the focusing knob takes about 25 seconds at high speed(!). However, now that I have noted the relative focus positions of my camera and lenses, getting very close to focus next time should be an absolute doddle. And all at a fractional cost of a commercial item.